Interquartz Gemini 9335 - Automatic Centrex external code insertion

15
If you receive incoming calls on the caller display, the number recorded will be
the full standard STD code and number. It will not include your external access
number so you will not be able to make a call to the caller from the display. To
make such calls possible, the telephone will accept a CENTREX external dialing
digit.
Automatic Centrex external code insertion
If you exit your Centrex group with, say, “9” it is possible to store this digit in the
telephone.
e.g. if the exit code is “9” the telephone can be programmed in the following way
 press store
 press “9”
 press store
 press “
”
If the above procedure is invoked, then any call that you make from the “Calls”
directory will automatically have the Centrex access code inserted before the
number is dialed.
To cancel this feature
 press store
 press store
 press “
”