Interquartz Gemini 9335 - To store a Call memory to Directory Memory; To store a Call Memory to Direct Access memory

35
If the details of your caller are stored in your own directory, then the name (as
stored) of that caller will also be shown on the display.
To store a Call memory to Directory Memory
1. Press the CALLS button
2. Press the ▲ and ▼ buttons to select desired number from the Caller list
3. Press STORE and then press DIRECTORY.
Follow the screen prompts
 at “ENTER NUMBER” prompt key in the number to be stored. Press STORE
 at “ENTER NAME” prompt key in the name to be stored (use the notes at
the beginning of this section on storing alpha characters). The names will be
stored in alphabetical order. Press STORE.
To store a Call Memory to Direct Access memory
1. Press CALLS button
2. Press ▲ and ▼ buttons to select desired number from the Caller list
3. Press STORE and then press a memory button (one- or two-touch memory
button).
Follow the screen prompts
 at “ENTER NUMBER” prompt key in the number to be stored. Press STORE
 at “ENTER NAME” prompt key in the name to be stored (use the notes at
the beginning of this section on storing alpha characters). The names will be
stored in alphabetical order. Press STORE.