EasyManua.ls Logo

Interquartz Gemini 9335 - Connection

Interquartz Gemini 9335
43 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
16
WHEN YOU FIRST INSTALL THE TELEPHONE
IT IS ESSENTIAL THAT YOU LIFT THE HANDSET
FOR A FEW SECONDS,
BEFORE REPLACING IT ON THE CRADLE.
Failure to do this may result in an apparently incorrect,
non-functioning of the Handsfree system.
Connection
Insert the line cord into the socket. Set the ringer volume and ringer pitch control,
as desired. Make sure that you have installed the power supply OR the batteries.
(see page 10)
Wall mounting
Using WALL MOUNT BRACKET (not provided) for wall mounting and attach the
WALL MOUNT BRACKET to the underside of telephone (See Figure 3B)
To enable the Handset to be supported in the cradle when the phone is mounted
on the wall mount bracket, follow the procedure shown in Figure 3A to reverse
the HANDSET RETAINER.
Note: The WALL MOUNT BRACKET illustrated in (Figure 3B) can be ordered.
Please contact authorized INTERQUARTZ dealer or telephone +44 (0)
161 763 3122 or email sales@interquartz.co.uk

Table of Contents

Other manuals for Interquartz Gemini 9335

Related product manuals