Interquartz Gemini 9335 - To delete a Directory memory; To call a Directory memory

31
The first digit of the number will then flash. Use the ▲ and ▼buttons to select the
digits(s) that need correcting; type in the new digit. Press STORE.
The first letter of the associated name will now flash. Again, use the ◄ and ►
cursor to select the letter(s) that need correcting and type in the new letter; press
STORE and the corrected entry will be stored.
To delete a Directory memory
Access the Directory memory to be deleted, as described above. Press the
CLEAR button twice in quick succession. “ERASED” will appear on the display
and the memory will be deleted.
There may be situations where you wish to delete the entire Directory memory to
do this; First of all, you should press DIRECTORY button to enter Directory
review mode.
Press CLEAR button twice in quick succession and then HOLD the CLEAR
button at second press until the screen has displayed “HOLD TO CLR DIR” The
screen displays “DIRECTORY CLEAR” after all Directory memories have been
erased.
To call a Directory memory
Access the Directory memory to be called, as described above. Press the DIAL
button. The telephone will then proceed to dial the number on the display in
Handsfree / Headset mode. You may pick up the Handset if you so wish.