To Next PageTo Next PageHow to level pump connectors with spa connectors on Intex 128454GN?
If the pump connectors are not level with the spa connectors on your Intex Swimming Pool, elevate the pump with wood or another type of insulated material to bring the pump’s connectors level with the spa’s connectors.
What to do if the bubble air blower does not work on my Intex 128454GN?
If the bubble air blower on your Intex Swimming Pool isn't working, turn off and unplug the spa. Let it cool down before restarting.
Why is there insufficient chlorine in my Intex Swimming Pool?
If you have insufficient chlorine in your Intex Swimming Pool, increase the sanitation system operating time and ensure the heater is off during the sanitation process. Use a spa cover when the spa is not in use or when the sanitation system is operating. If the bather load has increased, increase the sanitation system operating time and test the water using test strips. Check and clean the electrolytic cell if it is clogged or dirty.
How to fix an Intex Swimming Pool jet air control knob that is not working?
If the jet air control knob on your Intex Swimming Pool isn't working, clean any dirt inside the jet nozzles. If the jet airflow plumbing inside the spa tub is damaged, further assistance is needed.
Why are the jets weak in my Intex 128454GN?
If the jets output on your Intex Swimming Pool are weak, ensure the water level is between the MIN and MAX levels. Check for any obstructions in the suction inlet inside the tub and ensure it's not covered or blocked. Clean any dirt inside the jet nozzles. If the jet nozzles plumbing pipes are damaged, further assistance is needed.
What to do if the jet function does not work on my Intex 128454GN?
If the Intex Swimming Pool jet function isn't working, turn off and unplug the spa. Let it cool down completely before restarting.
What to do if the filtration pump is not working on my Intex 128454GN Swimming Pool?
If the filtration pump on your Intex Swimming Pool isn't working, clean or replace the filter cartridge in time. Also, check and clean the filtration inlet and outlet regularly. If the filter pump motor has failed, further assistance is needed.
How to fix an Intex Swimming Pool that is not heating properly?
If your Intex Swimming Pool isn't heating properly, first, increase the set temperature and ensure the spa cover is attached. Make sure the filter cartridge is clean; replace it if necessary. If the heater is in STANDBY mode, press the flame button twice to heat the water to the set temperature. If the heating element has failed, further assistance is needed.
Why does my Intex Swimming Pool keep tripping the household circuit breaker?
If the household circuit breaker trips when using your Intex Swimming Pool, ensure the circuit breaker has the correct rating. If it is overloaded, provide a dedicated circuit breaker feeding the spa electrical outlet only. If there's an electrical fault in the line, professional help is needed.
What to do if the Intex 128454GN Swimming Pool has no display or the spa control unit does not work?
If the Intex Swimming Pool's display isn't working or the spa control unit is unresponsive, first, ensure the spa is properly plugged in and switched on. Then, check that the control panel cable plug is firmly attached to the control base receptacle. Also, verify the power source and reset the RCD if it has tripped. If the RCD is broken, further assistance is needed.
General| Brand | Intex |
|---|---|
| Model | 128454GN |
| Type | Frame Pool |
| Shape | Rectangular |
| Material | PVC |
| Included Accessories | Filter pump |
