97A
S AVE THESE INSTRUCTIONS
Page 14
POOL VACUUM SETUP INSTRUCTIONS
English
POOL VACUUM SETUP
8
9
Place pool vacuum into the water. Fill up the vacuum hose with water
by submerging the hose into the water to remove all of the entrapped
air from the hose. TIPS: Starting from the end of vacuum head,
submerge the vacuum hose vertically into the water, section by
section.
25
With hose clamp, fasten one end of the vacuum hose (25) to the
connection of vacuum head. Make sure hose clamp is tight.
25
26
3
10
16
To Next Page
Loading...
