260
A
SAVE THESE INSTRUCTIONS
English
(260IO) MODEL ECO 8220/8230 & 7220/7230 SALTWATER SYSTEM ENGLISH 7.5” X 10.3” PANTONE 295U 08/15/2014
Page 20
SALTWATER SYSTEM STATIONARY MOUNTING
Some countries, especially in the European community, require the product to be
secured to the ground or to a base in a permanent upright position. Check with
your local authorities to determine if there is a regulation in your area regarding
above-the-ground swimming pool filter pumps. If yes, then the product can be
mounted to a platform using the two holes located in the base. See drawing
below.
The product can be mounted on a cement base or onto a wooden platform to
prevent accidental tipping. Total assembly must exceed 18kg .
1
.
For model ECO 7220/7230
: The mounting holes are 6.4 mm in diameter and
spaced 90 mm apart.
For model ECO 8220/8230
: The mounting holes are 6.4 mm in diameter and
spaced 97 mm apart.
2
. Use two bolts and lock nuts with a maximum of 6.4 mm in diameter.
90 mm
Model ECO 7220/7230
97 mm
Model ECO 8220/8230
To Next Page
Loading...
