Do you have a question about the Intex Fast-Fill AP619C and is the answer not in the manual?
To reduce the risk of electric shock: Always unplug this furnishing from the electrical outlet before cleaning.
To reduce the risk of burns, fire, electric shock, or injury to persons: Read all safety instructions carefully.
To reduce the risk of electric shock or injury, use indoors only, do not expose to rain. Store indoors.
Appliance has a polarized plug; use only in a polarized outlet. Inflate products up to 2 cubic meter volume.
No air pump maintenance required. Clean with mild soapy solution. Use PVC repair glue for repairs.
Plug in cord, slide switch to inflation mark, test firmness, and adjust as needed.
Ambient temperature affects pressure. Stretching is normal for new vinyl. Avoid extreme temperatures.
Plug in cord, slide switch to deflation mark, and remove all air.
Disconnect cord, store it in the compartment after deflation.
Connect a foot or manual pump to air passage. Inflate with cold air only, avoid over-inflation.
Deflate, ensure airbed is clean and dry before folding.
Fold airbed loosely, avoid sharp bends. Store in bag in a dry, cool location.
To reduce the risk of electric shock: Always unplug this furnishing from the electrical outlet before cleaning.
To reduce the risk of burns, fire, electric shock, or injury to persons: Read all safety instructions carefully.
To reduce the risk of electric shock or injury, use indoors only, do not expose to rain. Store indoors.
Appliance has a polarized plug; use only in a polarized outlet. Inflate products up to 2 cubic meter volume.
No air pump maintenance required. Clean with mild soapy solution. Use PVC repair glue for repairs.
Plug in cord, slide switch to inflation mark, test firmness, and adjust as needed.
Ambient temperature affects pressure. Stretching is normal for new vinyl. Avoid extreme temperatures.
Plug in cord, slide switch to deflation mark, and remove all air.
Disconnect cord, store it in the compartment after deflation.
Connect a foot or manual pump to air passage. Inflate with cold air only, avoid over-inflation.
Deflate, ensure airbed is clean and dry before folding.
Fold airbed loosely, avoid sharp bends. Store in bag in a dry, cool location.
| Brand | Intex |
|---|---|
| Model | Fast-Fill AP619C |
| Category | Water Pump |
| Language | English |












Loading...