120
PO
SAVE THESE INSTRUCTIONS
(120PO) ENGLISH 7.5” X 10.3” PANTONE 295U 10/10/2018
English
Page 23
WINTER PREPARATIONS
Winterizing your Above Ground Pool
After usage, you can easily empty and store away your pool in a safe place. You
must drain, disassemble and properly store the pool when the temperature drops
below 41 degrees Fahrenheit (5 degrees Celsius) to prevent ice damage to the pool
and related components. Ice damage can result in sudden liner failure or pool
collapse. Also see the section ‘’How To Drain Your Pool’’.
Should temperatures in your area not drop below 41 degrees Fahrenheit (5 degrees
Celsius), and you choose to leave your pool out, prepare it as follows:
1.
Cleanthepoolwaterthoroughly.IfthetypeisanEasySetPooloranOvalFrame
Pool, make sure that the top ring is properly inflated.
2.
Removetheskimmer(ifapplicable)oranyaccessoriesattachedtothethreaded
strainer connector. Replace strainer grid if necessary. Be sure all accessories parts are
clean and completely dry before storage.
3.
PlugtheInletandOutletfittingfromtheinsideofthepoolwiththeplugprovided
(sizes16'andbelow).ClosetheInletandOutletPlungerValve(sizes17'andabove).
4.
Removetheladder(ifapplicable)andstoreinasafeplace.Besuretheladderis
completely dry before storage.
5.
Removethehosesthatconnectthepumpandfiltertothepool.
6.
Add the appropriate chemicals for the winter period. Consult your local pool dealer as
towhichchemicalsyoushoulduseandhowtousethem.Thiscanvarygreatlyby
region.
7.
CoverpoolwithIntexPoolCover.
IMPORTANT NOTE: INTEX POOL COVER IS NOT
A SAFETY COVER.
8.
Cleananddrainthepump,filterhousingandhoses.Removeanddiscardtheoldfilter
cartridge.Keepasparecartridgeforthenextseason.
9.
Bring pump and filter parts indoors and store in a safe and dry area, preferably
between32degreesFahrenheit(0degreesCelsius)and104degreesFahrenheit
(40degreesCelsius).