EasyManua.ls Logo

Intex Krystal Clean Poolwater 6220 - Page 11

Intex Krystal Clean Poolwater 6220
28 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
112
SAVE THESE INSTRUCTIONS
Page 11
(112) MODEL 6220 KRYSTAL CLEAN POOLWATER SYSTEM ENGLISH 7.5” X 10.5” PANTONE 295U 12/25/2006
SSTTAATTIIOONNAARRYY MMOOUUNNTTIINNGG OOPPTTIIOONN
SALTWATER SYSTEM STATIONARY MOUNTING OPTION
Some countries, especially in the European community, require the product
to be secured to the ground or to a base in a permanent upright position.
Check your local authorities to determine if there is a regulation in your
area regarding above-the-ground swimming pool filter-pumps. If yes, then
the product can be mounted to a platform using the two (2) holes located in
the base. See drawing below.
The product can be mounted on a cement base or onto a wooden platform
to prevent accidental falling over. Total assembly must exceed 18kg.
1. The mounting holes are 8.2mm in diameter and spaced 180mm apart.
2. Use two bolts and lock nuts with a maximum of 8.2mm in diameter.
180mm

Related product manuals