112
SAVE THESE INSTRUCTIONS
Page 21
(112) MODEL 6220 KRYSTAL CLEAN POOLWATER SYSTEM ENGLISH 7.5” X 10.5” PANTONE 295U 12/25/2006
5. Attach the female end of the
garden hose to the drain
connector (19). See Fig. 14.
6. Place the other end of the hose in
an area where the water can be
safely drained away from the
house, plants, etc.
7. Insert the drain connector (19) to
the drain valve. See Fig. 15.
NOTE: The drain connector will
push the drain valve plug (10)
open inside the tank and water
will start to drain immediately.
8. Disconnect hose and drain
connector (19) when finished.
9. Re-insert drain valve plug (10) in
drain valve on inside of saltwater
tank.
10. Replace drain valve cap (11) on
outside of saltwater tank.
11. Follow "Adding Salt" procedure.
Fig (15)
Fig (14)
19
10
ALARMS (continued)
AALLAARRMMSS
To Next Page
Loading...
