Intex Krystal Clear 604 User Manual (English)

Questions and Answers:

S
Steven McknightSep 1, 2025
What to do if my Intex Krystal Clear 604 doesn't pump water or the flow is very slow?
- K
  Kelly KnappSep 1, 2025
  If your Intex Water Pump isn't pumping water or the flow is slow, it could be due to a few reasons. Check for any clogs in the inlet or discharge and clear any obstructions. Also, look for air leaks on the intake line by tightening hose clamps and inspecting hoses for damage, and ensure the pool water level is adequate. Scale or buildup on the cartridge can also cause this issue, so replace the cartridge if necessary. If the pool is excessively dirty, clean the cartridge more often. Ensure that the nozzle is installed at the upper position of the pool inlet, and the strainer at the lower position of the pool outlet.
E
ericksoncraigSep 2, 2025
How to fix Intex Swimming Pool Pump top cover leaking?
- D
  David ThompsonSep 2, 2025
  If the top cover of your Intex Swimming Pool Pump is leaking, remove the cover and check for the O-ring. Also, manually tighten the cover or air release valve to ensure they are secure.
J
Jamie MartinezSep 2, 2025
What causes Intex Swimming Pool Pump hose leaking and how to fix it?
- S
  Sherri MasonSep 3, 2025
  If the hose of your Intex Swimming Pool Pump is leaking, tighten or change the hose clamps. Also, put the o-ring back into the groove if it dislodged when connecting the hose. If the hose is broken, replace it with a new one.
A
ahawkinsSep 3, 2025
How to remove air lock from Intex Swimming Pool Pump?
- A
  Ashley ChapmanSep 3, 2025
  To fix an air lock in your Intex Swimming Pool Pump, open the air release valve, then lift and lower the inlet hose until water starts flowing out of the air release valve. Finally, close the air release valve.
J
James MccormickSep 4, 2025
How to fix Intex Krystal Clear 604 filter that doesn’t clean pool?
- Z
  ztranSep 4, 2025
  If your Intex Water Pump filter isn’t cleaning the pool effectively: * Adjust the chlorine and pH levels. Consult your local swimming pool supply stores. * Clean or replace the filter cartridge if it's dirty. * Check the cartridge for holes and replace it if damaged. * Operate the filter for longer periods if the pool is excessively dirty. * Clean the strainer screen at the inlet if it's restricting the water flow.
J
Jessica PinedaSep 5, 2025
How to remove air lock in Intex Krystal Clear 604?
- A
  anthonytheresaSep 5, 2025
  To remove an air lock in your Intex Water Pump: * Open the air release valve, lift and lower the inlet hose until water starts to flow out of the air release valve, then close the air release valve. This will help to release any trapped air in the pump housing and inlet hose.