(328IO) MODEL ZS6220 & ZS6230 OZONE & SALTWATER SYSTEM ENGLISH 7.5” X 10.3” PANTONE 295U 07/14/2017
328A
SAVE THESE INSTRUCTIONS
English
Page 18
MAINTENANCE (continued)
4.
Unscrew the collar of the flow sensor
(7)
and pull out the flow sensor from the electrolytic
cell
(9)
housing.
5.
Pour kitchen grade vinegar into the electrolytic cell
(9)
to immerse the titanium electrodes.
Soak for 1 hour.
6.
Open one side of the cell cover
(11)
, drain and properly dispose of the vinegar. Connect the
hose which goes from the pool to the cell. Flush the electrolytic cell housing with the pool
water.
7.
Reverse steps 3, 4, 5 and 6 to reconnect the electrolytic cell.
To Next Page
Loading...
Need help?
General
