EasyManuals Logo

Intex PureSpa SB-H20 User Manual

Intex PureSpa SB-H20
158 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #5 background imageLoading...
Page #5 background image
347
A
S AVE THESE INSTRUCTIONS
(347IO) SPA ENGLISH 7.5” X 10.3” PANTONE 295U 07/08/2020
English
Page 5
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly
qualied persons in order to avoid a hazard. Use only identical replacement parts when servicing.

The plug of SPA must be directly connected only to a earthed socket-outlet from a xed electrical
installation.
To reduce the risk of electric shock and re, do not use extension cords, timers, plug adaptors or
converter plugs to connect unit to electrical supply; provide a properly located outlet.
Do not attempt to plug in or unplug this product while standing in water or when your hands are wet.
Do not leave the spa empty for extended period of time. Do not expose the spa to direct sunlight for
extended period of time.
When the appliance is not in use for long period of time, such as in the winter, the spa set should
be disassembled and stored indoor.
Do not allow the water in the spa to freeze. Do not turn on the spa when the water is frozen.
Do not use the spa if damaged in delivery and/or malfunctioning in any fashion. Contact the Intex
service center for further direction.
Never use the spa alone or allow others to use the spa alone.
Never pour water with a temperature higher than 40°C (104°F) into the spa directly.
Keep all pets away from spa to avoid any damage.
Do not add bath oil or bath salt to the spa water.
The spa must be setup on a level, at and smooth surface that is capable of supporting the
maximum load of the lled spa with four adult occupants: weight 1136 kg (2500 lbs); six adults:
1592 kg (3500 lbs); eight adults: 1999 kg (4400 lbs).
Provide adequate drainage system around the spa to deal with overow water and splashes.
Use accessories exclusively provided by the spa manufacturer for safety reasons.
Not for public/commercial use and/or domestic renting dwelling settings.
All the information pertaining to the installation, cleaning and maintenance please refer to below
paragraphs of the manual.
Carefully read, understand, and follow all information in this user manual before installing and using
the spa. These warnings, instructions, and safety guidelines address some common risks of water
recreation, but they cannot cover all risks and dangers in all cases. Always use caution, common
sense, and good judgment when enjoying any water activity. Retain this information for future use.

Continuous, active, and vigilant supervision of weak swimmers and non-swimmers especially in
exercise spas, by a competent adult is required at all times (remembering that children under ve
are at the highest risk of drowning).
Designate a competent adult to supervise the spa each time it is being used.
When the spa is not in use, or unsupervised, remove all toys from the spa and its surrounding area
to avoid attracting children to the spa.

A safety cover or other safety protection device shall be used, or all doors and windows (where
applicable) shall be secured to prevent unauthorized access to the spa.


Table of Contents

Other manuals for Intex PureSpa SB-H20

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Intex PureSpa SB-H20 and is the answer not in the manual?

Intex PureSpa SB-H20 Specifications

General IconGeneral
Control PanelDigital
Air Jets120
BrandIntex
TypeInflatable Hot Tub
Digital Control PanelYes
Seating Capacity4 person
Water Capacity210 gallons
Bubble Jets120
Heating SystemYes
CoverIncluded
Height28 inches
ModelSB-H20

Related product manuals