EasyManuals Logo

Intex PureSpa SB-H20 User Manual

Intex PureSpa SB-H20
158 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #6 background imageLoading...
Page #6 background image
347
A
S AVE THESE INSTRUCTIONS
(347IO) SPA ENGLISH 7.5” X 10.3” PANTONE 295U 07/08/2020
English
Page 6

In order to avoid a hazard due to inadvertent resetting of the thermal cut-out, this appliance must
not be supplied through an external switching device, such as a timer, or connected to a circuit
that is regularly switched on and o󰀨 by the utility.
Maintain water chemistry in accordance with manufacturer’s instructions.
This product is provided with a RCD located at the end of the power cord. The RCD must be
tested before each use. Do not use the spa if the RCD does not function properly. Disconnect
the power cord until the fault has been identied and corrected. Contact a qualied electrician to
correct the fault. Do not bypass the RCD. There are no serviceable parts inside the RCD.
Opening the RCD will void the warranty.



RESET
RESET
TEST
TEST

RESET
RESET
TEST
TEST

Barriers, covers, alarms, or similar safety devices are helpful aids, but they are not substitutes for
continuous and competent adult supervision.

Keep a working phone and a list of emergency phone numbers near the spa.

Encourage all users especially children to learn how to swim.
Learn Basic Life Support (Cardiopulmonary Resuscitation - CPR) and refresh this knowledge
regularly. This can make a life-saving di󰀨erence in the event of an emergency.
Instruct all spa users, including children, what to do in case of an emergency.
Never dive into any shallow body of water. This can lead to serious injury or death.
Do not use the spa when using alcohol or medication that may impair your ability to safely use the
spa.
When covers are used, remove them completely from the water surface before entering the spa.
Protect spa occupants from water related illnesses by advising them to keep water treated and
practicing good hygiene. Consult the water treatment guidelines in the user’s manual.
Store chemicals out of the reach of children.
Attached the safety signage provided on the spa or within 2 m of the spa in a prominent visible
position.
 Plug the unit into a grounded electrical outlet.
 Press the  button on the RCD.
 Turn on the spa electrical equipment.
 Press the  button on the RCD. The RCD indicator should
turn o󰀨 and the electrical equipment should shut o󰀨. If the RCD
indicator does not turn o󰀨, and the electrical equipment does not
shut o󰀨, the RCD is faulty. Do not use the spa. Contact a qualied
electrician to correct the fault.
 Press the  button on the RCD. The indicator on the RCD
should turn on. If the RCD indicator does not turn on, the RCD is
faulty. Do not use the spa. Contact a qualied electrician
immediately to correct the fault.

Table of Contents

Other manuals for Intex PureSpa SB-H20

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Intex PureSpa SB-H20 and is the answer not in the manual?

Intex PureSpa SB-H20 Specifications

General IconGeneral
Control PanelDigital
Air Jets120
BrandIntex
TypeInflatable Hot Tub
Digital Control PanelYes
Seating Capacity4 person
Water Capacity210 gallons
Bubble Jets120
Heating SystemYes
CoverIncluded
Height28 inches
ModelSB-H20

Related product manuals