Intex PureSpa SSP-H-10-2 User Manual

254
PO
S AVE THESE INSTRUCTIONS
(254PO) SPA ENGLISH 7.5” X 10.3” PANTONE 295U 05/12/2017
English
Page 21
IMPORTANT:
You must drain out any remaining water inside the piping system of the control base
before replacing any parts.
Tools required:
One adjustable wrench and one Philip screwdriver.
NOTE:
The “special wrench tool” is included with the new fi lter pump motor replacement and not
with the spa set.
FILTER PUMP MOTOR DISASSEMBLY
123
456

Intex PureSpa SSP-H-10-2 Specifications

General

Brand	Intex
Model	PureSpa SSP-H-10-2
Category	Water Pump
Language	English