G
gentrymalloryAug 4, 2025
Why Intex SF70110 filter motor fails to start?
- LlarsenchristopherAug 4, 2025
The Intex Swimming Pool Pump filter motor might fail to start due to several reasons: it may not be plugged into a 3-wire outlet protected by a Class A Ground Fault Circuit Interrupter, or RCD; the fuse box or GFCI/RCD circuit breaker might need resetting (if it trips repeatedly, there may be an electrical system defect requiring an electrician); or the motor may be too hot, causing the overload protection to shut off. In the latter case, let the motor cool down before restarting.