To Next PageTo Next PageWhat to do if the pressure gauge doesn’t work on my Intex SX 1500 Swimming Pool?
If the pressure gauge on your Intex Swimming Pool doesn’t work, clear any obstructions in the intake by unscrewing it from the 6-way valve. If that doesn't resolve the issue, contact an Intex service center because the pressure gauge may be damaged.
Why is there a small leak from the air jet valve when the pump is on in my Intex Swimming Pool?
If there is a small leak from the air jet valve when the pump is on for your Intex Swimming Pool, remove all accessories (such as solar mat, auto pool cleaner, LED light) from the water circulation line and place the air jet valve cap over the air jet valve. Do not cover the air jet valve with the valve cap under normal situations or when the pump is operating.
How to fix Intex SX 1500 Swimming Pool filter motor that fails to start?
If the filter motor of your Intex Swimming Pool fails to start, first ensure the line cord is plugged into a 3-wire outlet protected by a Class A Ground Fault Circuit Interrupter, or RCD. If the GFCI/RCD circuit breaker has tripped, reset it. Should it repeatedly trip, there may be an electrical defect, so turn off the breaker and consult an electrician. Also, the motor may be too hot; allow it to cool down before restarting.
How to fix a leaking 6-way valve on my Intex SX 1500 Swimming Pool?
To address a leaking 6-way valve/cover on your Intex Swimming Pool, first remove the 6-way valve cover and ensure the O-ring is in place and clean. If dirty, clean the sand tank O-ring with garden hose water. Then, securely tighten the flange clamp.
How to stop small leak from air jet valve when Intex Swimming Pool pump is on?
To stop a small leak from the air jet valve of your Intex Swimming Pool when the pump is on, remove all accessories (such as solar mat, auto pool cleaner, LED light) from the water circulation line and place the air jet valve cap over the air jet valve. Do not cover the air jet valve with the valve cap under normal situations or when the pump is operating.
General| Shape | Round |
|---|---|
| Included Accessories | Filter Pump, Ladder, Ground Cloth, Pool Cover |
| Height | 48 inches |
| Material | PVC |
| Frame Material | Steel |
Critical safety warnings regarding product usage and potential hazards.
Guidance on connecting hoses for the sand filter pump to the pool.
Details valve positions, functions, and control panel elements for operation.
Steps for initial system setup, backwashing, rinsing, and normal filtering.
Instructions for operating the system under timer mode, manual mode, and power saving.
Recommended operating times for Intex pools based on size.
Recommended operating times for non-Intex pools based on water capacity.
