Invacare 5310IVC - 4.5 Assembling the Spring Fabric; 4.6 Adjusting and Reconnecting the Head Section Pull Tube

Invacare®HomecareBeds
4.5AssemblingtheSpringFabric
1.LifttheheadspringCawayfromthebedframetogive
slacktothefabric.
2.ConnectthespringfabricAtogetherwiththelinksB
provided.
4.6AdjustingandReconnectingtheHead
SectionPullTube
1.TodisconnecttheheadpulltubeassemblyAfromthe
sideframeofthefootspring,removethehitchpinE
andgrommet/washerFfromtheclevispinG.
2.ExtendtheinnerpulltubeshaftCmanuallyuntilthe
springbutton"clicks"intotheadjustmentholeofthe
outerpulltubeD.
3.ConnectthepulltubeendassemblyAtotheliftarm
oftheheadspringasfollows:
a.InserttheclevispinGintotheliftarmslotH.
b.Replacethegrommet/washerF.
c.SecurewithhitchpinE.
22
1114836-H-05