D
Daniel BentonSep 23, 2025
Why does Invacare Bathroom Aid lift stop while being raised?
- Aandrew85Sep 23, 2025
The Invacare Bathroom Aid lift may stop while being raised due to excessive load. Make sure that you observe the maximum load.
To Next PageTo Next Page
Why does Invacare Bathroom Aid lift stop while being raised?
The Invacare Bathroom Aid lift may stop while being raised due to excessive load. Make sure that you observe the maximum load.
What to do if my Invacare Aquatec ORCA lift makes no noise and won't move?
If your Invacare Medical Equipment lift isn't moving and you hear no motor noise, here's what to check: * Ensure the hand control jack socket is securely locked. * The battery may be flat; try fully recharging it. * Dirty contacts can be a problem; clean the plug on the backrest. If this doesn't work, contact your dealer. * Inspect the cable for crushing or damage; if damaged, you may need to replace the hand control. Contact your dealer, if necessary.
Why is the red light flashing and my Invacare Medical Equipment battery not charging?
If the red indicator light flashes while charging your Invacare Medical Equipment and the battery isn't charging, it could be due to faulty electronics or a faulty battery. In both cases the solution is to have your authorized dealer check or replace the hand control.
Why can my Invacare Medical Equipment lift go up but not down?
If your Invacare Medical Equipment lift can be raised but not lowered, it's possible the low-voltage protection has been activated. To resolve this, fully recharge the battery.
What to do if I have a faulty charger for my Invacare Aquatec ORCA Medical Equipment?
If you suspect a faulty charger with your Invacare Medical Equipment, have your authorized dealer check the charger. Also, avoid charging the hand control near heat sources or in direct sunlight. If the battery is too hot, charging will resume automatically once the temperature is within acceptable limits.
What to do if Invacare Bathroom Aid lift does not move?
If your Invacare Bathroom Aid lift isn't moving and you hear no motor noise, here are a few things to check: * Ensure the hand control's jack socket is correctly engaged. * The battery may be flat and needs a complete recharge. * Dirty contacts can also be the cause, so clean the plug on the backrest. * Inspect the cable for any crushing or damage. If damaged, the hand control should be replaced.
How to fix Invacare Mobility Aid with no motor noise?
If you don't hear the motor or your Invacare Mobility Aid lift doesn't move, consider the following: * Ensure the hand control jack socket is correctly engaged. * Recharge the battery completely if it's flat. * Clean the plug on the backrest if the contacts are dirty. * If the cable is crushed or damaged, replace the hand control.
Why Invacare Mobility Aid bath lift is not adhering securely?
If the Invacare Mobility Aid bath lift is not adhering securely to the bathtub, the suction cups might be old or damaged. Consider replacing them.
What to do if Invacare Lifting Systems lift stops while being raised?
If your Invacare Lifting Systems lift stops while being raised, it might be due to excessive load. Make sure you are observing the maximum load.
What to do if Invacare Lifting Systems battery is not charging and the red indicator light flashes during charging?
If your Invacare Lifting Systems' battery isn't charging and the red light is flashing, it may be due to faulty electronics or a faulty battery. Replace the hand control.
Provides essential warnings and precautions for using the product safely.
Important safety precautions to follow during the assembly and setup process.
Step-by-step instructions for correctly setting up the bath lift in the bathtub.
Instructions on how to charge the product's battery before use.
Provides safety precautions and warnings related to the operation and use of the bath lift.
Explains how to operate the bath lift using the hand control and its movements.
Step-by-step instructions for safely removing the bath lift from the bathtub.
A guide to identifying common faults, their possible causes, and recommended remedies.
Provides essential warnings and precautions for using the product safely.
Important safety precautions to follow during the assembly and setup process.
Step-by-step instructions for correctly setting up the bath lift in the bathtub.
Instructions on how to charge the product's battery before use.
Provides safety precautions and warnings related to the operation and use of the bath lift.
Explains how to operate the bath lift using the hand control and its movements.
Step-by-step instructions for safely removing the bath lift from the bathtub.
A guide to identifying common faults, their possible causes, and recommended remedies.
General| Height Adjustable | Yes |
|---|---|
| Material | Plastic |
| Weight Capacity | 135 kg |
| Total Length | 830 mm (32.7") |
| Overall Depth | 830 mm (32.7") |
| Color | White |
