What to do if my INVENTOR EVI-12 unit can not run?
If your INVENTOR Air Conditioner unit doesn't run, check if the power has been shut down, the power plug is loose, or the circuit protection device has tripped. Also, verify if the voltage is too high or low (tested by professionals) and ensure the TIMER is correctly used.
Why is the cooling or heating efficiency of my INVENTOR Air Conditioner not good?
If the cooling or heating efficiency of your INVENTOR Air Conditioner is not good, consider the following: Is the temperature setting suitable? Are the inlet and outlet vents obstructed? Is the filter dirty? Are the windows and doors closed properly? Is the fan speed set at low? Are there any heat sources in the room?
Why is there an unusual smell coming from my INVENTOR EVI-12 Air Conditioner outlet?
An unusual smell from your INVENTOR Air Conditioner outlet could be due to smells accumulated in the ambient. Try cleaning the filter. If the problem persists, the air conditioner may need cleaning; in that case, contact an authorized maintenance center.
Why is there water leakage in the outdoor unit of my INVENTOR EVI-12?
Water leakage in the outdoor unit of your INVENTOR Air Conditioner can occur for several reasons. When running in COOL mode, condensation may form on the pipe and pipe connections. In Auto Defrosting mode, ice thaws and flows out. In HEAT mode, water adhered to the heat exchanger may drip off.
Why is my INVENTOR EVI-12 indoor unit not delivering air?
In HEAT mode, the indoor unit may stop delivering air to prevent blowing cool air when the indoor heat exchanger temperature is very low (within 2 minutes). Also, in HEAT mode, if the outdoor temperature is low or humidity is high, frost can form on the outdoor heat exchanger, causing the unit to automatically defrost, and the indoor unit will stop blowing air for 3-12 minutes. During defrosting, water may flow out or vapor may be produced. Finally, in dehumidifying mode, the indoor fan may stop to prevent condensed water from vaporizing again and to restrain temperature rising.
Why does my INVENTOR EVI-12 Air Conditioner emit mist from the air outlet vent in COOL mode?
Mist emitted from the air outlet vent in COOL mode of your INVENTOR Air Conditioner happens because the room air is swiftly cooled down. After running for a while, the indoor temperature and humidity will decrease, and the mist will disappear.
What causes the noise from the indoor unit emitted by my INVENTOR EVI-12 Air Conditioner?
The noise from the indoor unit of your INVENTOR Air Conditioner could be the sound of the fan or compressor relay switching on or off. It may also occur when defrosting starts or stops, due to refrigerant flowing in the reverse direction.
Why is there moisture on the air outlet vent of my INVENTOR EVI-12?
If your INVENTOR Air Conditioner runs under high humidity for a long time, moisture may condense on the air outlet grill and drip off.
Why does my INVENTOR EVI-12 make a creaking noise when starting or stopping?
The creaking noise heard when starting or stopping your INVENTOR Air Conditioner is due to the deformation of plastic caused by temperature changes.
What is the sound of water flow I hear during the operation of my INVENTOR EVI-12?
The sound of water flow you hear during the operation of your INVENTOR Air Conditioner is due to refrigerant flowing and is not a malfunction.
Ensures proper electrical connection and safety measures.
Guidelines for efficient operation and basic upkeep.
Warnings against hazards and advice on professional repair.
Addresses potential electrical hazards from the power cord and water.
Details airflow adjustment and limitations on unit usage.
Lists unsafe actions and incorrect placement of the unit.
Explains how cooling works and the anti-freezing function.
Describes heating operation and the defrosting process.
Covers functions like anti-cool wind and gentle breeze.
Lists the acceptable indoor and outdoor operating temperatures.
Identifies key components of the indoor air conditioning unit.
Identifies key components of the outdoor air conditioning unit.
Explains fundamental remote control buttons for unit operation.
Details how to control fan speed and louver swing.
Describes setting timers and activating energy-saving features.
Explains turbo mode and left/right swing adjustments.
Details the X-FAN function for drying and the sleep mode.
Covers control of the unit's display light and temperature display.
Step-by-step guide for basic unit operation via remote.
Instructions for using advanced functions like sleep and timer.
Explains AUTO RUN, turbo, and lock functions of the remote.
Provides guidance on replacing remote control batteries and usage notes.
Details how to use the manual switch when the remote is unavailable.
Outlines steps for operating the unit during emergencies.
Guides on how to clean the front panel of the indoor unit.
Provides instructions for cleaning and maintaining the air filter.
Lists checks to perform before operating the unit.
Details maintenance tasks after the unit has been used.
Addresses problems related to immediate operation and unusual smells.
Explains causes for noises and mist formation during operation.
Troubleshoots issues where the unit fails to start or perform poorly.
Addresses problems with the remote control and water leaks.
Solves issues related to indoor unit airflow and moisture.
Lists severe problems that necessitate stopping operation.
Outlines essential rules and notices for unit installation.
Specifies criteria for selecting the optimal indoor unit placement.
Provides guidelines for positioning the outdoor unit correctly.
Covers crucial electrical safety measures and proper grounding.
Instructions for installing the rear panel and creating the piping hole.
Guides on connecting the drain hose and electrical wiring.
Explains how to route pipes and wires for the indoor unit.
Details the process of connecting the refrigerant pipes securely.
Covers the electrical connections for the outdoor unit.
Describes the process for testing for air and refrigerant leaks.
Lists checks to perform before starting the unit's test operation.
Outlines the steps for conducting a test operation of the unit.
Guides on how to install the healthy filter.
Explains how to clean the filter and its expected service life.
General| Brand | INVENTOR |
|---|---|
| Model | EVI-12 |
| Category | Air Conditioner |
| Language | English |
To Next Page
