EasyManuals Logo

INVENTOR IW14BL User Manual

INVENTOR IW14BL
116 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #12 background imageLoading...
Page #12 background image
12
EN
Thermorstat Temperature Setting
The thermostat is located internally, at the right hand
bottom side of the Wine Cooler.
• Setting “OFF”: the cooling operation stops
• Setting “MIN”: Minimum cooling (15°C -21°C)
Suggested when the storage quantity is minimal.
• Setting “NORMAL”: Normal cooling (8°C -15°C)
Upon initial use, make sure to set the thermostat
on “NORMAL” setting and allow 24hours prior to
placing any items.
• Setting “MAX”: Maximum cooling (2°C -8°C)
If there is a max capacity of bottles within the
device, or if the outside temperature is high, the
thermostat may be set to its highest position, for a
short period of time.
For correct temperature control settings, kindly consider
the following:
Room temperature
The frequent door opening of the Wine Cooler.
The quantity of stored bottles
The positioning of the appliance.
Temperature Zones
The air circulation creates dierent temperature zones
in the wine cooler. The upper interior level has the
highest temperatures while the lower level has the
lowest.
Wine bottle storage from top to bottom is advised as
follows:
- Strong red wine
- Pink and mild red wine
- White wine
- Champagne and spritzer
Pour wines shall be placed a bit lower than the serving
temperature. This will allow the wine to breathe and
still come to the proper serving temperature.
8. TEMPERATURE SETTING & ZONES

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the INVENTOR IW14BL and is the answer not in the manual?

INVENTOR IW14BL Specifications

General IconGeneral
BrandINVENTOR
ModelIW14BL
CategoryWine Cooler
LanguageEnglish