10
How to Use Advanced Functions
Swing function
LED DISPLAY
Press Swing button
The horizontal louver will swing up and down
automatically when pressing Swing button.
Press again to make it stop.
Keep pressing this button more than 2 seconds,
the vertical louver swing function is activated.
(Model dependent)
2s
Press this button to turn on and turn off
the display on the indoor unit.
Press LED button
Swing
LED
Swing
8°C function
LOCK function
O
O
O
O
Keep pressing Fan button for more than 2 seconds to activate/disable Silence
function.
Due to low frequency operation of compressor, it may result in insufficient cooling
and heating capacity. Pressing ON/OFF, Mode, Sleep, Turbo or Clean button while
operating will cancel silence function.
Silence function
Clean
5s
5s
Turbo
Press this button 2 times during one second under HEAT Mode and setting temperature of
16 C/60 F or 20 C/68 F.
The unit will operate at high fan speed (while
compressor on) with temperature automatically
set to 8 C/46 F.
2
+
Press together Clean button and Turbo button at the
same time more than 5 seconds to activate Lock function.
All buttons will not response except pressing these two
buttons for two seconds again to disable locking.
2s
Pressing On/Off, Sleep, Mode, Fan and Temp. button while operating will cancel this function.
To Next Page
Loading...
Need help?
General
