INVENTOR RG10B1/BGEF

33
11
FP function
LOCK function
O
O
Keep pressing Fan button for more than 2 seconds to activate/disable Silence
function.
Due to low frequency operation of compressor, it may result in insufficient cooling
and heating capacity.Pressing ON/OFF, Mode, Sleep, Turbo or Clean button while
operating will cancel silence function.
Silence function
Vane
5s
5s
Turbo
Press this button 2 times during one second under HEAT Mode and setting temperature of
16 C/60 F .
The unit will operate at high fan speed (while
compressor on) with temperature automatically
set to 8 C/46 F.
2
+
Press together Vane button and Turbo button at the
same time more than 5 seconds to activate Lock function.
All buttons will not response except pressing these two
buttons for two seconds again to disable locking.
2s
Pressing On/Off, Sleep, Mode, Fan and Temp. button while operating will cancel this function.
11
FP function
LOCK function
O
O
Keep pressing Fan button for more than 2 seconds to activate/disable Silence
function.
Due to low frequency operation of compressor, it may result in insufficient cooling
and heating capacity.Pressing ON/OFF, Mode, Sleep, Turbo or Clean button while
operating will cancel silence function.
Silence function
Vane
5s
5s
Turbo
Press this button 2 times during one second under HEAT Mode and setting temperature of
16 C/60 F .
The unit will operate at high fan speed (while
compressor on) with temperature automatically
set to 8 C/46 F.
2
+
Press together Vane button and Turbo button at the
same time more than 5 seconds to activate Lock function.
All buttons will not response except pressing these two
buttons for two seconds again to disable locking.
2s
Pressing On/Off, Sleep, Mode, Fan and Temp. button while operating will cancel this function.
Functia Silent
Continuati sa apasati butonul FAN mai mult de 2 secunde pentru a activa /
dezactiva functia Silent (unele unitati).
Datorita functionarii cu frecventa redusa a compresorului, aceasta poate
duce la o capacitate de racire si incalzire insucienta. Apasand butonul ON
/ OFF, Mode, Sleep, Turbo sau Clean in timpul functionarii va anula functia
Silent.
Functia 8°C
Apasati acest buton de 2 ori in timpul unei secunde in modul HEAT si reglati temperatura
de 16°C (60°F).
Unitatea va functiona
la viteza mare a ventila-
torului (in timp ce com-
presorul este pornit)
cu temperatura setata
automat la 8°C/46°F
Apasand On / O, Sleep, Mode, Fan si Temp. in timpul functionarii va anula aceasta functie.
Functia LOCK
Apasati simultan butonul Clean si butonul Turbo mai
mult de 5 secunde pentru a activa functia de blocare.
Toate butoanele nu vor raspunde, cu exceptia apasarii
acestor doua butoane din nou timp de doua secunde
pentru a dezactiva blocarea.
8°C function
LOCK function
O
O
O
O
Keep pressing Fan button for more than 2 seconds to activate/disable Silence
function.
Due to low frequency operation of compressor, it may result in insufficient cooling
and heating capacity. Pressing ON/OFF, Mode, Sleep, Turbo or Clean button while
operating will cancel silence function.
Silence function
Clean
5s
5s
Turbo
Press this button 2 times during one second under HEAT Mode and setting temperature of
16 C/60 F or 20 C/68 F.
The unit will operate at high fan speed (while
compressor on) with temperature automatically
set to 8 C/46 F.
2
+
Press together Clean button and Turbo button at the
same time more than 5 seconds to activate Lock function.
All buttons will not response except pressing these two
buttons for two seconds again to disable locking.
2s
Pressing On/Off, Sleep, Mode, Fan and Temp. button while operating will cancel this function.