When playing an audio CD, the DISPLAY
banner appears automatically. It displays the
current track and the amount of time the track
has been playing, the total amount of time on
the disc and the current time running on the
disc.
Press the DISPLAY button on the remote
control to display the DISPLAY banner.
The options below show you what happens
when you press the DISPLAY button.
Press DISPLAY (1x)
“Single Elapsed” appears along with the
current track playing and the time of that track.
Press DISPLAY (2x)
“Single Remain”appears along with the current
track playing and the amount of time left.
Press DISPLAY (3x)
“Total Elapsed” appears along with the current
track playing and the total time playing on CD.
Press DISPLAY (4x)
“Total Remain”appears along with the current
track playing and the amount of time left on
CD.
Using the REPEAT Feature
The default mode for the REPEAT feature is
OFF. Pressing REPEAT button on the remote
control consecutively changes the REPEAT
options as follows:
Track - repeat the track that is playing.
All - repeat the disc that is playing.
As you toggle through the options, the REPEAT
option changes. The track repeats once that
track has ended. The selected repeat option
loops repeatedly until you turn it off.
EN
Playing an Audio CD
Playing an Audio CD 21
To Next Page