Need help?Do you have a question about the INVT GD20-1R5G-4 and is the answer not in the manual?
General| Model | GD20-1R5G-4 |
|---|---|
| Power | 1.5 kW |
| Input Frequency | 50/60 Hz |
| Output Frequency | 0-400 Hz |
| Phase | 3-phase |
| Rated Current | 3.7A |
| Protection Level | IP20 |
| Control Mode | V/F control |
| Protection Features | Overcurrent, overvoltage, undervoltage, overload, short circuit |
Defines safety terms (Danger, Warning, Note) and explains warning symbols used in the manual.
Provides essential safety instructions for installation, operation, maintenance, and disposal.
Guides users through initial steps including unpacking, inspection, and application confirmation.
Details the technical specifications of the inverter, including power, input/output, and features.
Covers environmental conditions, installation site, and physical mounting procedures for the inverter.
Provides detailed wiring diagrams and instructions for main and control circuits.
Introduces the inverter's keypad, its buttons, and LEDs for control and monitoring.
Explains how to navigate menus, modify parameters, and set passwords using the keypad.
Parameters for various protection functions like phase loss, overvoltage, and overload.
Parameters for Modbus serial communication, including address, baud rate, and data format.
Lists recommended routine maintenance intervals and checking criteria for inverter parts.
Provides guidance on identifying, troubleshooting, and resetting various inverter faults and alarms.
Introduces the Modbus protocol, its modes (ASCII/RTU), and master/slave concepts.
Discusses common communication issues and their potential causes and solutions.
To Next Page