INVT Goodrive100-PV Series - Wiring Terminals

Goodrive100-PV Series Solar Pumping VFD Power frequency & PV switching solution
78
Power (kW)
Model
W
H
D
A
B
4
GD100-004G-45-PV-AS
GD100-004G-25-PV-AS
2.2
GD100-2R2G-45-PV-AS
550
700
200
400
675
GD100-2R2G-S25-PV-AS
GD100-2R2G-SS25-PV-AS
1.5
GD100-1R5G-45-PV-AS
GD100-1R5G-S25-PV-AS
GD100-1R5G-SS25-PV-AS
0.75
GD100-0R7G-45-PV-AS
GD100-0R7G-S25-PV-AS
GD100-0R7G-SS25-PV-AS
0.4
GD100-0R4G-S25-PV-AS
GD100-0R4G-SS25-PV-AS
Note:
 The VFDs that do not implement auto switching do not have the suffix -AS.
 The VFDs ≤ 2.2kW are equipped with the boost module, supporting auto switching.
 For -S25 and -SS25 models with the boost module, the DC input voltage cannot be greater
than 440V. For -45 models with the boost module, the DC input voltage cannot be greater
than 600V.
C.3 Wiring terminals
The following figures show the wiring terminals of different models for IP54 VFDs.
+ - R S T N U V W
Figure C-3 Wiring terminals of 4-37kW models