Need help?Do you have a question about the INVT GD20-2R2G-4 and is the answer not in the manual?
Defines safety terms like Danger, Warning, Note, and explains warning symbols used in the manual.
Provides essential safety instructions for operating the inverter, including qualified personnel and power handling.
Covers safety procedures for delivery, installation, commissioning, and running the inverter.
Covers the mechanical aspects of installing the inverter, including environment and mounting.
Details the standard wiring practices and provides connection diagrams for main and control circuits.
Details the functions of each keypad button and navigation methods for parameter access.
Provides step-by-step instructions on how to modify function codes and set parameters.
Details fundamental parameters for speed control, run command, and frequency settings.
Covers parameters related to inverter start-up modes, braking, and acceleration/deceleration.
Parameters for configuring motor characteristics, overload protection, and performance settings.
Settings for configuring digital and analog input terminals, including pulse inputs and virtual terminals.
Parameters for configuring relay and analog outputs, including selection and delay times.
Configuration for various protection features, including phase loss, overvoltage, and current limits.
Provides a systematic approach to identifying and resolving inverter faults and alarms.
Details how faults are indicated by LEDs and panel messages, and lists common fault codes.
Explains the methods for resetting the inverter after a fault condition has been cleared.
To Next Page
General