Need help?Do you have a question about the INVT GD20-7R5G-4-EU and is the answer not in the manual?
General| Model | GD20-7R5G-4-EU |
|---|---|
| Output Power | 7.5kW |
| Output Current | 15A |
| Protection Level | IP20 |
| Storage Temperature | -20°C to +60°C |
| Input Voltage | 3-phase 380V-480V |
| Control Method | V/F |
| Protection Features | Over-voltage, Under-voltage, Over-current |
| Communication Interface | RS485 |
| Operating Temperature | -10°C to +50°C |
| Humidity | 5% - 95%, non-condensing |
| Altitude | Up to 1000m |
Defines safety terms and explains warning symbols used in the manual.
Provides general safety guidelines for VFD installation, operation, and maintenance.
Covers unpacking, application, and environment confirmations before VFD use.
Items to check after installation and steps for basic commissioning.
Details safety data, decommissioning, and technical specifications.
Covers installation environment, direction, and mounting modes.
Details main circuit and control circuit wiring diagrams and terminals.
Explains the Safe Torque Off (STO) function, logic table, and delay times.
Parameters governing VFD start-up and stop modes, including DC braking.
Parameters defining asynchronous motor characteristics for VFD configuration.
Parameters specific to vector control mode for speed loops and current control.
Details fault codes, possible causes, and solutions for troubleshooting.
To Next Page