Important Safety Instructions
Rack Online 1-3k UPS User Manual I
Important Safety Instructions
Save these instructions
This manual contains important safety instructions. Read all safety and operating instructions
before operating the uninterruptible power systems (UPS). Adhere to all warnings on the unit
and in this manual. Follow all operating and user instructions. This equipment can be operated
by individuals without previous training.
Maximum load must not exceed that shown on the UPS rating label. The UPS is designed for
data processing equipment. If uncertain, consult your dealer or local representative.
The 1-3kVA@200/208/220/230/240VAC is designed for use with a three-wire input (L,N,G).
WARNING
The battery can present a risk of electrical shock and high
short circuit current. Following precautions should be
observed before replacing the battery.
l Wear rubber gloves and boots.
l Remove rings, watches and other metal objects.
l Use tools with insulated handles.
l Do not lay tools or other metal objects on the batteries.
l If the battery is damaged in any way or shows signs of leakage, contact your local
representative immediately.
l Do not dispose of batteries in a fire. The batteries may explode.
l Handle, transport and recycle batteries in accordance with local representative.
WARNING
Although the UPS has been designed and manufactured to
ensure personal safety, improper use can result in electrical
shock or fire. To ensure safety, observe the following
precautions:
l Turn off and unplug the UPS before cleaning it.
l Clean the UPS with a dry cloth. Do not use liquid or aerosol cleaners.
l Never block or insert any objects into the ventilation holes or other openings of the UPS.
l Do not place the UPS power cord where it might be damaged.
To Next Page
Loading...
Need help?
General
