Controls and Indicators
True Online 6-20k UPS User Manual
22
Display Function Submenu
Output
information
Output information:
Voltage, current, frequency, PF
Load information:
Active power, apparent power, percent
Status of UPS
Alarms, S-code, firmware version, system
information
Set and function
Set: language, contrast, communication
set(SNT, Modbus), Modbus set
Function: function 1(transfer to bypass/escape,
fault clear, mute on/off), function 2(battery test,
maintenance test, stop test)
History log /
Rated capacity:
10KVA
1phase in/out: 1/1
/
Input voltage /
Battery voltage
and capacity
remained
/
Output voltage
and load percent
/
System working
mode
S--single mode, E--ECO mode, P-parallel
mode, 2-the unit ID is 2 in system, the units ID
in parallel system should be different
Mute on, mute off
To Next Page
Loading...