iMars grid-tied solar inverters Installation
25
4.3 Mechanical installation
Since the installation place can be made by different construction materials, the inverter can be
installed by different mounting methods. Take the typical installation environment as the example,
the manual describes how to install the inverter on concrete wall. And because of different
structure, the three-phase inverter has different instillation modes.
The inverter should be mounted in a vertical position of 90°to the horizontal line as shown in figure
4.7.
4.3.1 Installation of three-phase inverter
Figure 4.7 Installation bracket of 12kW / 15kW/ 17kW/ 20kW / 25kW / 30kW
To Next Page
Loading...
