INVT iMars BG30KTR - Page 49

iMars grid-tied solar inverters Display panel
47
Setting item
LCD display
Instruction
Setup Cash
Setup Cash
Type: EUR
Val/kWh: 00.50噉/1kWh
EUR
Enter into the interface and edit the
currency type and cash through
“ ”
or
“
”. And then press “ENT”
again to the
next line.
After editing
the four bits, press
“ENT
” to save the edition and press
“ESC
” to exit.
T
he currency types include EUR, POD
,
CNY and USD.
S
etup
Date/Time
Setup Date/Time
Date: 2012/01/15
Time: 12:14:30
1
Enter into the interface and edit the date
and time through
“ ” or “ ”. A
nd then
press
“ENT” again to the next line. A
fter
editing
the four bits, press “ENT”
to save
the edition and press “ESC” to exit.
ˈ
L
anguage
Curr. Language : English
English
Chinese
German
Dutch
Enter into the interface and edit the
language through
“ ” or “ ”. A
nd then
press
“ENT”
again to save the edition
and press
“ESC” to exit.
The default language is English.
Select
Country
Country : Australia
Germany
England
Australia
Greece
Denmark
Holland
Enter into the interface and select
country through
“ ” or “ ”. A
nd then
press
“ENT”
again to save the edition
and press “ESC” to exit.
Setup mode
Setup Model: Independ
Independ
Parallel
The DC input mode includes
“independent
” and “parallel”:
“independent
mode” is the
independent
MPPT of
Track A and Track B; “
parallel
mode
”
is the parallel MPPT of Track A
and Track B.
T
he default mode is “independent”.
The input mode setting is invisible if the
inverter is in power generation.
I
t is only
available during DC power on and AC
power off.
P
ress “ ” or “ ”
to select the setting
mode and press
“ENT” to save the
setting or
“ESC” to return.
If the situation of section
6.4.8
occurs, it
is necessary to switch the DC input to
“parallel” mode.