IOGear GCS1108 - Set Logout Timeout; Edit Port Names

25
Set Logout Timeout
This function allows you to set a time that the KVM will automatically logout after being idle
for a certain period of time. Move the red highlight bar to this function and press [Enter].
Then enter a number from 0-180 (in terms of minutes) as the time interval and press [Enter].
Then, press [Esc] to exit from the function.
Edit Port Names
This function allows you to customize a
name on each port of the KVM. Simply
move the red highlight bar to the port that
you wish to customize a name and press
[Enter]. Then, press [Esc] to exit from the
function.
Enter the port name that you wish to show
inOSDforthatspecicportandpress
[Enter] to complete the editing. Then, press
[Esc] to exit from this function.