IOGear GCS1722 - Alternate HSM Invocation Keys; Alternate Port Switching Keys

- 16 -
Alternate HSM Invocation Keys
AnalternatesetofHSMinvocationkeysisprovidedincasethedefaultsetconictswithprogramsrunningonthe
computers.
To switch to the alternate HSM invocation set, do the following:
1. Invoke HSM (see page 15)
2. Press and release [H].
The HSM invocation keys become the Ctrl key (instead of Num Lock) and the F12 key (instead of minus).
Note: This procedure is a toggle between the two methods. To revert back to the original HSM invocation keys,
invoke HSM, then press and release the H key again.
Alternate Port Switching Keys
The port switching activation keys can be changed from tapping the Scroll Lock key twice ([Scroll Lock] [Scroll Lock]) to
tapping the Ctrl key twice ([Ctrl] [Ctrl]). To change the port switching activation keys, do the following:
1. Invoke HSM (see page 15)
2. Press and release [T].
Note: This procedure is a toggle between the two methods. To revert back to the original [Scroll Lock] [Scroll Lock]
method, invoke HSM, then press and release the T key again.