IOGear GCS1722 - Keyboard Language; Keyboard Operating Platform

Keyboard Language
To change the keyboard language, do the following:
1. Invoke HSM (see page 15).
2. Press [F6] [nn] [Enter].
Note:nnisatwo-digitnumberthatrepresentsthekeyboardlanguagecode(USEnglish:33;French:08;Japanese:15).
Keyboard Operating Platform
TheGCS1722/GCS1724’sdefaultportcongurationisforaPCcompatiblekeyboardoperatingplatform.Ifyourconsole
uses a PC compatible keyboard and you have a Mac attached to a port, for example, you can change the port’s keyboard
operatingplatformcongurationsothatthePCcompatiblekeyboardemulatestheMackeyboard.Theprocedureisas
follows:
1. Bring the KVM focus to the port you want to set.
2. Invoke HSM (see page 15)
3. Press and release the appropriate Function key (see table below). After completing this procedure, you automatically
exit HSM.
- 17 -
Port Switching
Hotkey Action
[F2] Enables Mac keyboard emulation, see Mac Keyboard, page 23 for details.
[F3] Enables Sun keyboard emulation, see Sun Keyboard, page 24 details.
[F10] Automatically detects and sets the keyboard operating platform.