IOGear GCS1722 - List Switch Settings; USB Reset; Hotkey Buzzer Control; Disable Port Switching Keys

List Switch Settings
To see a listing of the current switch settings, do the following:
1. Open a text editor or word processor and place the cursor in the page window.
2. Invoke HSM (see page 15).
3. Press and release [F4] to display the settings.
USB Reset
If the USB loses focus and needs to be reset, do the following:
1. Invoke HSM (see page 15).
2. Press and release [F5].
Hotkey Buzzer Control
The Buzzer can be hotkey toggled on and off. To toggle the Buzzer, do the following:
1. Invoke HSM (see page 15).
2. Press and release [B].
The Buzzer toggles on or off.
Disable Port Switching Keys
To disable the Port Switching Keys ([Scroll Lock] [Scroll Lock] / [Ctrl] [Ctrl]), do the following:
1. Invoke HSM (see page 15).
2. Press [X] [Enter].
Note: This procedure is a toggle. To enable the Port Switching keys repeat steps 1 and 2.
- 18 -