Mouse Port-switching
To enable/disable the Mouse Port-switching function, do the following:
1. Invoke HSM (see page 15).
2. Press [W].
Note:
1. This procedure is a toggle.
2. The default setting is disabled.
3. The feature is only supported when mouse emulation is enabled.
Mouse Emulation Control
To toggle between mouse emulation enabled and disabled, do the following:
1. Invoke HSM (see page 15).
2. Press [M].
Keyboard Emulation Control
To toggle between keyboard emulation enabled and disabled, do the following:
1. Invoke HSM (see page 15).
2. Press [N].
Note: When keyboard emulation is disabled, the [m], [w], [F2], [F3], [F10], [F4], [F5], and [F6] hotkeys are disabled.
Other OS Mode
To reset keyboards and mice for operating systems that do not support USB 2.0, do the following:
1. Invoke HSM (see page 15).
2. Press [F1].
- 20 -
To Next Page
