www.naturalchoicewater.com ION 900 Series Owners Manual
Step 3: Prepare the ION for Operation (Plug N Play Setup)
When you plug in the ION, it automatically prepares for operation requiring
about five minutes to complete. During this time you may hear water flowing
inside the ION. This is normal.
NOTE: The ION will not dispense water from the faucet while it is preparing for
operation.
While the ION is preparing for operation, LEDs 1 and 2 are green and blinking.
During Plug N Play:
LEDs 1 and 2 are
green and blinking
■ For Model 901, please go to page 15.
■ For Model 902, 904, and 905, please go to page 14.
■ For Model 903, please go to page 16.
instaLLation (continued)
13
To Next Page
Loading...
