ION Audio Aquaboom™ X User Guide 11
Light Modes
Press the L
ight button repeatedly to toggle between one of the modes for the LEDs on
Aquaboom™ X. Press and hold L
ight button to turn button lights o.
Note: For the best lighting eect, you may need to increase the volume of your connected
device or input source.
The speaker LED light modes are:
• C
razy Rainbow Beat-Sync: The lights will move clockwise like a rainbow. The rainbow
will speed up and slow down accordingly as the song volume increases and decreases.
• B
eat Sync Star: The center lights spin around the speaker clockwise in a star pattern.
The spin speed will change based on music volume. The side LEDs will light up in sync
with the star pattern speed.
• L
ight Pulse Beat Sync: All LEDs react by flashing from inside the center color ring to
the 4 side light areas based on the music volume. All LEDs will cycle through the color
spectrum.
• C
olorful Waves:
The lights will move from right to left ina wave pattern and change
color every time the wave changes direction. All LEDs will cycle through the color
spectrum.
• C
olor Cycle: All LEDs will be a single color while cycling through the color spectrum in
a slow and smooth transition from color to color.
• T
wo-Tone Fade: All LEDs will fade in and out in a two-tone color as they cycle through
the spectrum of colors.
• S
tatic Color: All LEDs stay the same color (the color can be adjusted from the ION Sound
Control™ app). The default color is blue unless changed in the ION Sound Control™ app.
• R
andom: The side LEDs cycle through the full spectrum of colors randomly, changing
every 5-7 seconds.
• O
ff: All speaker LEDs are o. The button LEDs will remain on.
PRESS
To Next Page
Loading...
Need help?
General
