ION Audio Aquaboom™ X User Guide 4
Charging and Battery Information
For the quickest charging time, power o
Aquaboom™ X
and use the included USB-A to
USB-C® cable to connect the USB-C® charging port on the rear panel of the speaker to a USB
power adapter (DC 5V 2A, not included) connected to a power outlet, or your computer
(powered on). A full charge can take up to 3 hours, depending on the specifications of your
5V, 2A adapter.
If no audio is played through the Aquaboom™ X speaker for 15 minutes, the unit will enter a
standby mode to conserve battery life. This may mean the Bluetooth signal is paused, no audio
is coming through a device connected to the aux port, or the volume is set to 0. To wake the
unit, simply resume audio signal or press any button.
When the Aquaboom™ X speaker is connected to a Bluetooth audio output device and no
audio is playing from any source, the speaker will automatical
ly power o after 60 minutes
have passed.
SETUP
To Next Page
Loading...
