Why am I playing a record but not hearing any audio from my ION Complete LP Turntable?
If you're not hearing any audio while playing a record on your ION Complete LP, make sure the unit is powered on and the needle is correctly placed on the record. Also, if headphones are plugged in, unplug them to hear sound from the internal speakers.
How to fix incorrect playback speed on my ION Complete LP?
If your record is playing at the wrong speed on your ION Turntable, make sure the 33 / 45 / 78 switch is set to the correct speed for the record you are playing.
What to do if I am not hearing the radio station on my ION Complete LP?
To hear the radio station on your ION Complete LP, remove any 1/8” (3.5 mm) cable from the Line In before switching to Tuner mode.
What to do if I'm connected to a Bluetooth speaker but don't hear any audio from my ION Turntable?
If you've connected to a Bluetooth speaker but aren't hearing audio, first try turning your ION Complete LP off and on again, then re-pair the device. Also, check the volume knob on the Complete LP to ensure the Bluetooth output level is turned up. Disconnect any headphones connected to the Complete LP, as they may be redirecting the sound.
General| Drive Type | Belt Drive |
|---|---|
| Connectivity | USB, RCA |
| Built-in Preamp | Yes |
| Cartridge Type | Moving Magnet |
| Platter | Aluminum |
| Power Supply | AC Adapter |
| Type | Turntable |
| Speeds | 33 1/3, 45 RPM |
| Included Accessories | USB Cable, RCA Cable |
| Tonearm | Straight |
| Included Software | Audacity |
To Next Page
