4
How to Communicate With the iDM02
Numeric Keypad
If a value to be edited is a two-digit number, you must enter a two-digit
number. If the number is a three-digit number, you must enter a three-digit
number. If necessary, enter a leading 0 to fill out the required number of digits.
The INC/DEC Buttons
The two small buttons with the up arrow and down arrow symbols (next to the
number keys) are called the INC/DEC buttons respectively. Pressing the INC
button once increases the value of the entire number by one. Pressing the
DEC button once decreases the value by one.
These buttons, and the TEMPO/PAGE buttons, also have a "scroll" feature. If
you press and hold a button, after a short pause the display will either
increment or decrement at a rapid rate.
Buttons that Toggle
The Mode buttons, FILL button, and several function buttons (DRUM SET,
RECORD SETUP, MIDI SETUP, and UTIL) "toggle" between two states. Each
button press sets the switch to its alternate state. Example: Press the
PATTERN/SONG button once to change from Pattern to Song; press again to
change from Song to Pattern.
To Next Page
Loading...
Need help?
General
