7
Using Luxe LP With Your Computer
Recording
To record music to your computer, you can use ION EZ Vinyl/Tape Converter and a USB cable. EZ
Vinyl/Tape Converter conveniently saves your recordings to your computer. After you finish
converting your vinyl, you can then burn to CD or load onto portable media devices.
Visit ionaudio.com to download the free EZ Vinyl/Tape Converter software.
1. With EZ Vinyl/Tape Converter installed on your computer, use the included USB cable to
connect Luxe LP's USB port to an available USB port on your computer.
2. On your computer, you can open EZ Vinyl/Tape Converter by going to Start Menu All
Programs (Windows) or the Applications menu (macOS).
3. Follow the on-screen instructions to set up your recording. When prompted to play your music,
move Luxe LP's tonearm over the record to start playback.
Note: To listen to a record while it’s playing, listen through Bluetooth speakers, your computer's
speakers, or connect Luxe LP's RCA outputs to a stereo system or powered speakers. Do not
connect them to phono-level inputs; Luxe LP's RCA outputs are line-level and could damage a
device with phono-level inputs.
4. When the record has ended, Luxe LP's tonearm will automatically return to the arm clip.
Visit ionaudio.com/computer-optimization for more information on optimizing your computer for
audio.
Playback
You can listen to the music on your computer through its internal speakers or through headphones
connected to it. (Luxe LP cannot be used as a playback device for your computer's audio.)
To listen to a record while it's playing, listen through Bluetooth speakers, your computer's speakers,
or connect Luxe LP's RCA outputs to a stereo system or powered speakers. Do not connect them to
phono-level inputs; Luxe LP's RCA outputs are line-level and could damage a device with phono-
level inputs.
To Next Page
Loading...
Need help?
General
