ION LUXE - After Use; Lint Filter

No need to twist the tool to curl. Repeat the above operation with the two barrels until the
desired styling is achieved.
5. Using the Pik attachment: Before using the Volumizing Pik, style hair completely with the
desired attachment. Tussle the root of your hair with the teeth of the pik to create volume.
Start at the root and pull the pik up and away from the scalp. Repeat the above operation
until the desired styling is achieved.
6. Using the Diffuser attachment: Start with towel-dried hair. Work your way around your
head, bunch curls from the ends between the teeth of the diffuser. Bring the diffuser up to
your roots. Pause and hold for 5-8 seconds. For added volume, ip your head upside down
and bunch curls from below. Repeat the above operation until the desired styling is
achieved.
7. Using Oval Brush attachment: Start with mostly dried hair. Take a 2 inch section of hair
and place the oval brush at the base of your roots. Roll the brush outward and down from
roots to ends. Repeat the above operation until the desired styling is achieved.
8. Using Smoothing Brush Attachment: Start with mostly dried hair. Take a 1-inch section of
hair and place the prongs of the brush underneath the hair at the root. Prongs should be
facing out. Gently glide the brush down from the root to the ends. Repeat the above
operation until the desired styling is achieved.
9. Using Concentrator attachment: Start with towel-dried hair. Take a 2-inch section of hair
and slowly move the mouth of the nozzle from root to tip, until dried. Pro tip: Using a round
brush with the concentrator can create a smooth and sleek style. Repeat the above
operation until the desired styling is achieved.
AFTER USE
1. Turn off the dryer and unplug the power plug.
2. Put the dryer on a heat-resistant surface until it cools down.
3. Once the dryer and attachments are cool, press the unlock button and remove the
attachments.
4. Disassemble the rear cover, and clean the air inlet regularly.
5. Store the dryer in a safe, dry and clean place.
4
LINT FILTER
This dryer is equipped with a removable lint lter. Please clean your filter and
remove any lint and debris from this filter monthly.
3. The Reset button will
pop out. This veries the
safety device is operating properly. If the Reset button does not pop out,
do not use the unit. Return it immediately for service.
4. Press the Reset button to reactivate the ALCI safety device. Your hair dryer
is ready for use.