8) Split Charger
Automatically charges machine’s battery when vehicle engine is running.
The split charger should not be relied upon as the sole source of charging
for the vehicle’s battery. Regular charging using the mains-powered
charger is recommended.
When the vehicle’s engine is running, a
green LED illuminates to indicate that
charging is taking place.
9) Recirculation Pump
12v pump re-circulates pure water from tank through NGDI filter.
(0PPB Machines only).
10) Delivery Pumps
12v Pure Water delivery pumps
11 A & B
Incoming and outgoing water connections. The system has optional water connections
for both left/right hand drive vehicles.
12) Battery
The machine’s 12volt power source
13) Fast Fill Pump (Optional upgrade)
A 240v pump to boost water pressure to increase pure water production (reduces holding
tank filling time).
14) Thermopure™ Burner (Thermopure™ Systems Only)
The Thermopure™ burner situated behind the carbon filter.
When the Thermopure™ is operating, the burner components become
very hot and injury could occur if touched. (Do not operate the
Thermopure™ with the filters removed)
To Next Page
Loading...