IONIC Zero PPM - Filter ID Discs & Lifespan

Machine Component Identification
15
Filter ID Discs
The ID Discs can be found on the top of each filter housing (1)
ID discs provide information about the filter contained within the housing (2)
It also provides information about the maximum estimated filter life (3)
Estimated Filter Life
Information about filter life and subsequent replacement frequencies is
provided for guidance purposes only. Actual filter life is dependent on local
water conditions, usage and care in routine operation and maintenance.
Information printed on filter ID discs and in the table below provides
estimates about likely filter replacement frequencies.
Filter T ype
Estimated Life
Order No.
Carbon (C)
Replace every 4 months.
IF CARBON
5 Micron
Replace every 4 months
IF SED
Softener (CA)
Replace after 3 years
IF SOFT
Reverse Osmosis (RO)
When water quality or production speed
is reduced by more than 10%
IF RO
PPM
When water quality rises above 1-2 ppm
IF DI
PPB
At Every 4th PPM Filter replacement
IF NGDI
UV
Replace Lamp every 12 months
NB: Snap Rings and ‘O’ Rings must be replaced every twelve months.