Need help?Do you have a question about the IONIC Zero PPM and is the answer not in the manual?
Imminent danger likely to cause serious injury or loss of life.
Safety situations that may cause serious injury or loss of life.
Safety situations that may cause problems or damage to equipment.
Procedures essential for correct operation.
Electrical equipment causing serious injury or loss of life.
CO2 hazard causing serious injury or loss of life.
Indicates low noise levels produced by the equipment.
Introduction to the advanced water fed pole system for cleaning.
Technical specifications for system dimensions based on tank size.
Dry and wet weight specifications for different tank capacities.
Diagram and list of the main components of the Zero™ system.
Diagram and description of the control panel features and indicators.
Diagram and table of fuse functions, amps, and positions for system protection.
Diagrams showing the Zero™ system components with filters detached.
Descriptions of components like split charger, pumps, battery, and burner.
Diagram and description of the components related to the holding tank.
Diagram illustrating the various types and placement of filters in the system.
Detailed explanations of the function of each filter type (Carbon, RO, DI, etc.).
Information on filter ID discs and estimated filter replacement frequencies.
Recommendations and procedures for connecting a suitable water supply.
How low pressure and temperature impact pure water production.
Procedures and recommendations for connecting the electrical supply.
Guidance for installing water treatment systems within buildings.
Explains caution labels on filter housings and pump run-dry warnings.
Explains the necessity of water softening for system performance and capacity selection.
Step-by-step instructions for pure water production with the Zero™ system.
Details the initial system purging and flushing stages of the operation cycle.
Describes the tank filling and water polishing stages of the operation cycle.
Outlines the regeneration, shutdown, and reset procedures for the operation cycle.
Operation of the Thermo-pure™ system, including safety and heating functions.
Lists malfunction codes and their meanings for the Thermopure™ heating unit.
How to operate delivery pumps and connect water fed poles.
Step-by-step guide for operating delivery pumps and adjusting volume.
Information on operating pumps remotely from a control panel.
Procedures for general cleaning, battery charging, and draining.
Overview and diagram for replacing filter cartridges in the system.
Step-by-step guide for filter replacement on the 'S' model.
Further steps for removing filter caps, housing, and snap rings.
Steps for removing the filter element and cap from the housing.
Steps for refitting the filter housing, cap, and snap ring correctly.
Procedure for replacing filters in stainless steel housings using hydraulics.
Guidance on when and how to clean the RO system and identify foulants.
Instructions for charging the battery using the CTEK XS7000 charger.
Technical details and specifications for battery charging and condition.
Importance and schedule for UV lamp maintenance and replacement.
Steps for safely disconnecting and removing the UV lamp.
Steps for unclipping connectors and withdrawing the UV lamp for replacement.
Procedure for preparing the machine for winter or long-term storage.
Specific winterisation procedures for various filters and the battery.
Basic techniques for cleaning windows with the waterfed pole system.
Guidance on pole technique, manual handling, and operational safety.
Identification of hazards and risks associated with waterfed pole window cleaning.
Road safety, vehicle loading, and preventing Legionnaires disease.
Factors for choosing equipment and operating in adverse weather conditions.
Electrical safety considerations, PPE, and required training for operators.
Details the warranty coverage, conditions, and exclusions for the system.
Specific limitations and exclusions that void the warranty.
Importance and scope of annual safety inspections for system installations.
To Next Page
General