Index.
Product Features 3
Compatibility 3
Video installation guides 4
Fitting Aurora Series columns to your UHPLC system
For Bruker CaptiveSpray source 6
Using Bruker Column Toaster 7
Using Sonation Column Oven (PRSO-V1 and PRSO-V2) 8
For Thermo Scientific Nanospray Flex source 9
with Sonation Column Oven (PRSO-V1 and PRSO-V2) 9
with an IonOpticks 5cm Rapid Column Housing (5CMNFSH1)
with an IonOpticks TS Nanospray Flex Adapter (TSFLXAD01) 11
For Thermo Scientific EasySpray Source 13
with a TS column into an EasySpray source (ES081 and ES082) 13
Setting up the IonOpticks Heater and Heater Controller (COLHTR01 and IOHEATCON1) 5
Operation of Aurora Series columns 14
Initial operation 14
Standby and idle conditions 14
Removal from a UHPLC 14
Recommended buffer compositions 14
Column volumes 14
Column temperature 14
Column equilibration 14
Sample loading 14
Example data 14
Recommended gradients 15
DISCLAIMER: The use of “we” “us” or “our” in this User Guide are references to IonOpticks Pty Ltd ACN 621 674 459. The information in this User
Guide including (without limitation) the recommendations, safety guidelines and product warnings with respect to the use of our products are to be read
strictly subject to our terms and conditions which can be located at www.ionopticks.com and the limitations and exclusions of our liability found within
those terms. Products should not be used if they appear damaged. We accept no liability for any loss or damage howsoever or wherever arising (including
death and/or personal injury) which results from or is connected with the failure by the customer to use our products strictly in accordance with the
directions in this User Guide.
10
2© Copyright 2023. Ion Opticks Pty Ltd
Spray voltage
Operating environmental conditions
14
14
To Next Page
Loading...