23
D. Set Tracking Rate
Press MENU => “Settings” => “Set Tracking Rate,”
Then you can select “Solar Rate”, “Lunar Rate”, “0.5 Sidereal Rate” or “Sidereal Rate”. The
Mount Status Indicator will reflect the setting changes.
E. Set Eyepiece Light
Use this function to adjust the light intensity of SkyGuider Pro illuminated polar scope. If you
have an illuminated-reticule eyepiece and has the same socket, you may use this option to adjust its
light intensity.
F. Language
Select one of supported menu languages.
G. Set Guiding Rate
The default guiding rate of the mount is 0.50 * Sidereal Rate, or (1± 0.5)X. This setting allows
you to change the guiding rate from 0.10 to 0.90 sidereal rate. The guiding rate will be reset to 0.5X
when power off the mount.
H. Start Delay Trig
This function only works when a camera is connected to the mount with electric shutter trigger
cable and Tracking Photography is chosen for imaging session.
Press MENU => “Settings” => “Start Delay Trig,”
This setting will let you choose how long the camera will wait before taking the first photo after
the Tracking Photography parameter was set. It can start right away or delay 5, 10 or 20 seconds.
Set Guiding Rate
Start Delay Trig
Set Time and Site
Set Beep
English
简体中文
Solar Rate
Lunar Rate
0.5X Sidereal Rate
Sidereal Rate
Set Display
Set Tracking Rate
Set Eyepiece Light
Language
To Next Page
Loading...
